GEAR: A RANGE OF HIGH ASPECT FOILS THAT CELEBRATES 10 YEARS OF R&D

News
Kite
SUP
Surf
Wing

19 july 2024 0

In May 2014, we launched our range of Allvator foils. Since then, we have continued to innovate to move the lines.

Being part of the origins of the immense global development of foiling is a privilege.
We made it our mission to create the perfect foils to experience the sessions of our dreams. And make them accessible to as many people as possible.

As we dream big, we have had to work harder than ever:
An R&D team of many powerful talents.
Hours of calculation on thousands of digital prototypes.
Hundreds of hydrodynamic or structural prototypes.
Countless hours of testing on the bench and on the water.
A Team signature on all our models which certifies their performance.

The groundbreaking performances of our foils in a nutshell:

200cm2 less than the previous range for equivalent lift.
Unprecedented glide.
Optimal speed.
Profile forgiveness across the entire wingspan.
Absolute control when breaching.
A super healthy behavior on the surface, which does not stall.
A self-tightening connection, that’s easily dismountable.
A constant profile for more rigidity.
Insane driving precision.

We have invested ten years of knowledge, but also the fruits of these 100,000 foils sold, in a capacity for innovation that’s unique in the world. A monstrous Team, hydrodynamicists, composite engineers, mechanical engineers, cutting-edge design and simulation softwares, heavyweight calculators... to leave no room for approximation.

Our new range of high aspect foils is just incredible.

Now, let the performance speak!

SUP foiler: Malo, GONG team rider, Veloce H front wing and stab, V3 fuselage, HM77 mast and Cruzader Point FSP Pro.

4 new high aspect front wings

Curve H: the front wing for carves and surfing, with ease of pumping and a formidable drive.
Fluid H: the high-performance front wing to shred with lots of speed and commitment.
Veloce H: the supersonic front wing with incredible glide and pumping.
Veloce HDW: the very high aspect front wing which boosts glide and speed.

3 stabilizers

The Curve H stab: highly maneuverable stab in carves, with great lift in the low end, that is easy to use for surfing or freeride sessions.
The Fluid H stab: ultra versatile high-performance stab that combines maneuverability, glide, pop and speed to perform in surfing, high pace freeriding and freestyle.
The Veloce H stab: The stab that over-boosts glide and speed thanks to its incredible efficiency.

A new HM85 carbon mast for high performance.

The 85HM carbon mast is a masterpiece of technological expertise. Glide, stiffness, lightness, and responsiveness: it’s the essential mast for foilers seeking excellence.
It allows you to unlock your full potential in high performance. Stunning accelerations, insane top speeds, instant response in carves, sharp and precise pop, and highly efficient pumping.

Total compatibility

Our fuselages guarantee you total compatibility for all possible combinations:

The V3 Fuselage: The high-performance fuselage to assemble the V3 foils with the V3 masts.
The Mast Fuselage Connector V2 to V3: to assemble V2 aluminum masts with V3 fuselages.
Retrofit fuselages for V3 masts: the range of fuselages for assembling foils of different generations on V3 masts.
Retrofit fuselages for V2 masts: the range of fuselages for assembling foils of different generations on V2 masts.

SuperLock Connection

The SuperLock self-tightening front wing connection has been designed to guarantee perfect tightening even after hours of sessions. The more pressure you put into the front wing, the tighter it fits into the fuselage. The pressure angle makes it very easy to disassemble the front wing, even after long and intense sessions.

This fitting only requires two screws under the FW, which makes changing the front wing easier and faster. This tightening principle, already validated for several years on our V2 stabs, is now available in an optimized version on the front wings.