Les nouveaux packs SUP First 2025 sont disponibles

Nouveaux packs SUP First 2025 en ligne

Discover the 2025 range of inflatable wing boards

Discover the 2025 HIPE

2025 TEAM SERIES WINGS NOW AVAILABLE!

Les Wings 2025 Team Series sont en ligne !

The revolutionary "NOVO" kite surfboards

Cart

Cart0

Your cart is empty !

It's flat around here...

Packs Wingfoil

Packs SUP

GEAR: NEW COVERS FOR FOILING SPARE PARTS!

News
Kite
SUP
Surf
Wing

19 january 2023 0

GONG covers specially designed to protect high aspect front wings and stabs are now also available for our spare parts of a more moderate aspect ratio or spare parts of other brands!

A new size is also available in high ratio for small wings not exceeding 72cm in wingspan.

The elements of your foil require great attention during transport and handling on land. These are large pieces of equipment that you’ll damage sooner or later without the use of a cover. In addition, tips without a cover can damage their direct environment such as the interior of a car for instance. Finally, we recommend leaving the covers on the foil until the last moment because a gust of wind can flip your board and seriously damage the tips (the covers are cut so that you can mount/dismount the foil without removing the covers ). Same goes for after your session, we advise you to put the covers back on the front wing and the stab as soon as possible.

The range of our GONG covers now extends to the Rise, X-Over, Curve, Fluid and Veloce front wings and stabs. It can also fit the front wings and stabs of other brands.

The range is composed as follows:

PROTECTIVE COVER FOR FRONT WING R (Regular) for the front wings Rise and X-Over. Available in 4 sizes: 70cm, 80cm, 90cm and 100cm.
PROTECTIVE COVER FOR FRONT WING T (Tall) for Curve, Fluid and Veloce front wings. Available in 5 sizes: 67cm, 76cm, 86cm, 97cm and 107cm.
PROTECTIVE COVER FOR FRONT WING H (High aspect) for Fluid H, Veloce H, Ypra, Ypra S front wings. Available in 5 sizes: 85-H, 95-H, 105-H, 115-H, 122-H .
PROTECTIVE COVER FOR STAB R for Rise, X-Over, Curve, Fluid and Veloce stabs. Available in 4 sizes: 40 cm, 43 cm, 47 cm and 55 cm.
PROTECTIVE COVER FOR STAB H for Fluid H and Veloce H stabs. Available in 3 sizes: 40H, 44H and 47H.

The sizes displayed are the maximum width (wingspan) that each cover can accommodate. Find the complete dimensions on our product sheets to check compatibility with spare parts from another brand.