Inflatable I-SUP Technology - Woven Fusion


Thanks to its high-end Woven Dropstitch Fusion inflatable technology, GONG I-SUP boards are sleek, lightweight, highly rigid, and incredibly durable.

The I-SUPs feature a double thermo-welded layer on the deck and the hull. It is this membrane that gains in lightness while maintaining the rigidity of a double layer.

The dropstitch used inside our I-SUPs is a Woven Dropstitch : it is the best assembly technique of the inflatable world, for best in class performance, rigidity and lightness.

  • Woven Dropstitch technology, the best compromise between weight/stiffness/strength. Combining our historical Double Layer Welded technology with the new Woven Dropstitch, this technology is by far the most reliable, lightest and stiffest.
  • Weight savings of around 20% compared to the classic Double Layer (no glue between the 2 welded PVC layers).
  • Rigidity gain of 30% compared to standard technology.
  • Strength gain: twice as thick as standard technology.
  • Double layer of PVC on the rails.
  • Premium Woven Dropstitch: the slightest irregularity is refused and the batch is resold to low cost factories.
  • High density Dropstitch Woven: with more threads per square meter than a basic Woven, it resists much higher pressures, lasts much longer, and does not present a risk of explosion.
  • Working pressure: 15 PSI. Our Stand Up Paddle Boards are perfectly rigid at 15 PSI. There is no need to overinflate them, but you can mount them at 20 PSI without any problem.
    Two-year Warranty on all our Inflatable Boards.
  • We keep in stock all the elements that make up your Board because we are manufacturers. So, you can easily repair them and make them last for more than ten years. It’s as simple as repairing a bicycle wheel.
Image

With its top of the range inflatable technology in Woven Dropstitch, this GONG board is beautiful, light, very rigid and really solid.

The I-SUPs are the best, yet still accessible with our direct sales distribution that does not add margins.

What is Woven Dropstitch?

To understand Dropstitch, it is two skins that are connected by threads every x millimeters. These skins are made of waterproof PVC and the threads are ultra-resistant. All these threads are vertical and of the same length. They allow the two skins to be parallel under tension. When we create this mesh of threads, we are going to make “knots” on the surface a bit like canvas. Then we drown these surfaces in PVC to form the waterproof skins.

We then describe the particularities of the Woven under two axes:

1/ Vertical

The Dropstitch threads are no longer aligned vertically but crossed at different angles, thus forming oblique struts that are cleverly distributed to balance each other. This concept gives much more rigidity to the whole.

2/ Horizontal

The flat braiding of the Dropstitch (the knots) becomes a very compact mesh which brings a great rigidity to the Board. In Woven Dropstitch the fibers are spread out instead of being in cylinders. This mesh is tighter and more homogeneous. It consumes less PVC in the interstices, like combed fibers which consume less resin in the Carbon.

The density of the mesh naturally increases rigidity and requires a thinner PVC backing than conventional Dropstitch (1.9mm vs. 2.5mm for equivalent rigidity).

This optimized weave therefore allows the material to be considerably lighter, without altering its qualities.

Always double layer please!!
Attention, our techno remains a Double Layer thermo-welded with all its advantages of rigidity and strength.

What we call the Woven Dropstitch is the heart of the inflatable board, which makes the inner dynamics of the Board. But on the outside, nothing is better than a Double Welded Layer to protect your Board from aggressions.

For your information, the Woven can be offered in single or double layer. It’s obviously cheaper in single layer 😉 Inform yourself and ask questions…

The Double Layer Woven is the high-end version of the Inflatable Boards.

Inflatable I-SUP Race Technology - Woven Fusion


Thanks to its high-end Woven Dropstitch Fusion inflatable technology, GONG I-SUP boards are sleek, lightweight, highly rigid, and incredibly durable.

The I-SUPs feature a double thermo-welded layer on the deck and the hull. It is this membrane that gains in lightness while maintaining the rigidity of a double layer.

The dropstitch used inside our I-SUPs is a Woven Dropstitch : it is the best assembly technique of the inflatable world, for best in class performance, rigidity and lightness.

  • Woven Dropstitch technology, the best compromise between weight/stiffness/strength. Combining our historical Double Layer Welded technology with the new Woven Dropstitch, this technology is by far the most reliable, lightest and stiffest.
  • Weight savings of around 20% compared to the classic Double Layer (no glue between the 2 welded PVC layers).
  • Rigidity gain of 30% compared to standard technology.
  • Strength gain: twice as thick as standard technology.
  • Double layer of PVC on the rails.
  • Premium Woven Dropstitch: the slightest irregularity is refused and the batch is resold to low cost factories.
  • High density Dropstitch Woven: with more threads per square meter than a basic Woven, it resists much higher pressures, lasts much longer, and does not present a risk of explosion.
  • Working pressure: 15 PSI. Our Stand Up Paddle Boards are perfectly rigid at 15 PSI. There is no need to overinflate them, but you can mount them at 20 PSI without any problem.
    Two-year Warranty on all our Inflatable Boards.
  • We keep in stock all the elements that make up your Board because we are manufacturers. So, you can easily repair them and make them last for more than ten years. It’s as simple as repairing a bicycle wheel.
Image

Inflatable I-SUP Adventure Technology - Woven Fusion


With their premium Woven Dropstitch Fusion inflatable technology, GONG iSUP boards are stylish, weight-optimized, extremely rigid, and genuinely durable.

The I-SUPs feature a double thermo-welded layer on the deck and the hull. It is this membrane that gains in lightness while maintaining the rigidity of a double layer.

The dropstitch used inside our I-SUPs is a Woven Dropstitch : it is the best assembly technique of the inflatable world, for best in class performance, rigidity and lightness.

The I-SUP Adventure features a 65L central double chamber, allowing you to paddle with greater peace of mind and safety while still staying very cautious 😉 In addition to increasing the board’s rigidity, this double chamber also acts as a safety float in the event of damage.

It is also the most durable board in the I-SUP range, with both the hull and deck reinforced by an additional PVC layer. This extra reinforcement gives it exceptional stiffness for an inflatable board, especially when combined with the double-chamber construction!

  • Woven Dropstitch technology, the best compromise between weight/stiffness/strength. Combining our historical Double Layer Welded technology with the new Woven Dropstitch, this technology is by far the most reliable, lightest and stiffest.
  • Weight savings of around 20% compared to the classic Double Layer (no glue between the 2 welded PVC layers).
  • Rigidity gain of 30% compared to standard technology.
  • Strength gain: twice as thick as standard technology.
  • Double layer of PVC on the rails.
  • A third PVC layer on the hull provides enhanced safety.
  • The Woven Dropstitch Fusion double chamber creates two additional longitudinal reinforcements: safety working hand in hand with rigidity!
  • Premium Woven Dropstitch: the slightest irregularity is refused and the batch is resold to low cost factories.
  • High density Dropstitch Woven: with more threads per square meter than a basic Woven, it resists much higher pressures, lasts much longer, and does not present a risk of explosion.
  • Working pressure: 15 PSI. Our Stand Up Paddle Boards are perfectly rigid at 15 PSI. There is no need to overinflate them, but you can mount them at 20 PSI without any problem.
    Two-year Warranty on all our Inflatable Boards.
  • We keep in stock all the elements that make up your Board because we are manufacturers. So, you can easily repair them and make them last for more than ten years. It’s as simple as repairing a bicycle wheel.
Image

Inflatable I-SUP Explorer Technology - Woven Fusion


Thanks to its high-end Woven Dropstitch Fusion inflatable technology, GONG I-SUP boards are sleek, lightweight, highly rigid, and incredibly durable.

The I-SUPs feature a double thermo-welded layer on the deck and the hull. It is this membrane that gains in lightness while maintaining the rigidity of a double layer.

The dropstitch used inside our I-SUPs is a Woven Dropstitch : it is the best assembly technique of the inflatable world, for best in class performance, rigidity and lightness.

  • Woven Dropstitch technology, the best compromise between weight/stiffness/strength. Combining our historical Double Layer Welded technology with the new Woven Dropstitch, this technology is by far the most reliable, lightest and stiffest.
  • Weight savings of around 20% compared to the classic Double Layer (no glue between the 2 welded PVC layers).
  • Rigidity gain of 30% compared to standard technology.
  • Strength gain: twice as thick as standard technology.
  • Double layer of PVC on the rails.
  • Premium Woven Dropstitch: the slightest irregularity is refused and the batch is resold to low cost factories.
  • High density Dropstitch Woven: with more threads per square meter than a basic Woven, it resists much higher pressures, lasts much longer, and does not present a risk of explosion.
  • Working pressure: 15 PSI. Our Stand Up Paddle Boards are perfectly rigid at 15 PSI. There is no need to overinflate them, but you can mount them at 20 PSI without any problem.
    Two-year Warranty on all our Inflatable Boards.
  • We keep in stock all the elements that make up your Board because we are manufacturers. So, you can easily repair them and make them last for more than ten years. It’s as simple as repairing a bicycle wheel.
Image