HOW TO : sangler ses boards !!!

To strap the boards on the roof of a vehicle, you have to do as images below : – While passing the straps under the bar by making a U under each bar, so with a return. – Strap firmly but without excess. – Make key (single node) behind the cleat clamping strap for safety. Be careful not to put pressure on the tab on the strap with the key. – Roll the excess strap and repeat the keys that it does not flap around in the wind. – If necessary a little twist the straps if they vibrate in the wind. Warning tightening will be less good and wear faster. – Check the condition of your belts regularly. – Arrange logically boards. The bizaroïdes stacks are banned. – And of course make sure your roof bars are strong and secure. Caution is advised. Do not do anything.
You need a bar with strap. Anxiety can add a safety strap that will go around the entire load and strain into the cabin with the doors open. Please note that damages the next door and let the water run into the car in case of rain. And note that over tighten the safety belt webbing may relax the other (main) and collapsing the roof bars. Advisor : l’Ours et GONG Surfboards. Source : Team GONG SUP, prenons de suite les bons réflexes.