Re-entry 360°

A combination of Re-Entry and a 360 ° Tail Slash, the re-entry 360 ° is a real styley way to finish with class.

When you arrive to do your usual Re-Entry, you will have to push on the back leg to lower the tail before the nose. A little extra weight on the tail will release the Fins. It is a move that goes against nature and that gives a counter order to the board, then we let it slide back into place.

As soon as the spin is in motion and all that’s left to do is to dose the transfer of weight to the nose and loop the 360 ° by pushing the heels / tips. This one is much less violent than the classic 360° Tail Slash because the foam absorbs the speed of going down in reverse.

Make note that the foam pushes less than a hollow face. So, to make a 360 ° tail slash in this area, it is necessary to correctly transfer the weight around.

The trick is to push in the Bar to make an almost 90° angle in the B / C. You will be able to turn under the axis of the lines without being impeded by the Bar.