Description

To achieve ultimate performance, we’ve created that full carbon monobloc mast/fuselage/top plate set in one piece. 

Its hydrodynamics have been redesigned with perfectly profiled connections to reduce drag, decrease disturbance to be able to generate more speed. 

But also, it provides a lot more stiffness thanks to extended fillets. 

The thickness of the mast has been increased by a few millimeters to gain in overall stiffness. 

Our tests show that this additional drag is largely compensated for by a stiffness that boosts speed and dynamic. Your drive is more explosive! 

All the testers report a higher speed. And this stiffness eliminates all piloting blur: the foil is lively and ultra-accurate. We have also widened the mast to eliminate twisting, especially in the lower part of the mast. 

Not very noticeable in surfing and for lighter surfers, this twist was problematic for pumping and strong riders who lost a lot of energy and concentration on this point. 

By widening the mast chord, from the top plate to the fuselage, we have completely erased this twist. 

The shape of the profile remains our magic profile because this gain in width goes hand in hand with the gain in thickness. 

Note that we also gain a bit of drive with this little extra chord width on the mast, asserting the trajectories a bit more. 

This 100 cm carbon mast provides the necessary height for comfort and performance in wing and kite. Far from the chop and with considerable margins, you can go faster, stronger, further in the actions. Even when surfing with a wing or a kite, the gain is significant. 


The benefits are clear:

1. More dynamism with a 100% carbon prepreg draping.

2. More stiffness thanks to the single-pass high pressure moulded monobloc.

3. No possible looseness between the parts thanks to the monobloc concept.

4. Significant weight saving with our floating foam mast.

5. Simple maintenance, repairs possible, and easily replaceable inserts.


1/ The 100% carbon prepreg draping is a model of its kind. The 50 layers on the mast and 155 layers on the fuselage are distributed in 5 angles to guarantee an incredible dynamism. The return to its initial shape after effort is 4 times faster than on a standard mast. 

2/ This huge part is produced in a 400kg mould, handled by powerful lifting tools to protect our workers. More than 4 hours are necessary to arrange all the layers in perfect order. Then comes the moment of closing the mould, always impressive in strength and precision. Finally, it is rolled in the heating press to compress it to 120 tons and bake it at 155°. A mast of rare stiffness will come out of it. 

3/ The looseness between the mast/fuselage/top plate parts is eliminated. Dismantling is no longer obligatory and galvanic corrosion is an old memory. The holes in the fuselage are through holes and mounted with anti-corrosion brass threads. You will be able to screw your wings firmly. A little thread lock in the inserts and your tightening is durable and protected. 

4/ The huge advantage of high-quality carbon is its stiffness. So, it is not necessary to put as much material as with other materials. In this way, we save a significant weight loss, almost 30% compared to aluminum. And more significant than the measured weight, the dynamism brings a sensation of liveliness and therefore incredible lightness. 

5/ A damaged insert: you can replace it in a few seconds for a few euros. Easy. 

A bump in the rocks: you repair your mast as you would do on your board. 

The Freeride set has a shorter Fuselage at the interlockings to be only compatible with our Kite Foil Front Wings.


Delivered in a high-quality bag, it is the Rolls of the monobloc masts. 

Treat yourself with a beautiful and hyper efficient carbon piece.

-50%

Foil Allvator Carbon Mast 100 cm Freeride Monobloc

Monobloc carbon freeride mast only compatible with our freeride kite foils.

See Description
Regular Price 349€
Sale Price 349€Regular Price 699€
-50%
Taille 100 cm
GONG | Foil Allvator Carbon Mast 100 cm Freeride Monobloc
GONG | Foil Allvator Carbon Mast 100 cm Freeride Monobloc
GONG | Foil Allvator Carbon Mast 100 cm Freeride Monobloc
GONG | Foil Allvator Carbon Mast 100 cm Freeride Monobloc
GONG | Foil Allvator Carbon Mast 100 cm Freeride Monobloc
GONG | Foil Allvator Carbon Mast 100 cm Freeride Monobloc
Description

To achieve ultimate performance, we’ve created that full carbon monobloc mast/fuselage/top plate set in one piece. 

Its hydrodynamics have been redesigned with perfectly profiled connections to reduce drag, decrease disturbance to be able to generate more speed. 

But also, it provides a lot more stiffness thanks to extended fillets. 

The thickness of the mast has been increased by a few millimeters to gain in overall stiffness. 

Our tests show that this additional drag is largely compensated for by a stiffness that boosts speed and dynamic. Your drive is more explosive! 

All the testers report a higher speed. And this stiffness eliminates all piloting blur: the foil is lively and ultra-accurate. We have also widened the mast to eliminate twisting, especially in the lower part of the mast. 

Not very noticeable in surfing and for lighter surfers, this twist was problematic for pumping and strong riders who lost a lot of energy and concentration on this point. 

By widening the mast chord, from the top plate to the fuselage, we have completely erased this twist. 

The shape of the profile remains our magic profile because this gain in width goes hand in hand with the gain in thickness. 

Note that we also gain a bit of drive with this little extra chord width on the mast, asserting the trajectories a bit more. 

This 100 cm carbon mast provides the necessary height for comfort and performance in wing and kite. Far from the chop and with considerable margins, you can go faster, stronger, further in the actions. Even when surfing with a wing or a kite, the gain is significant. 


The benefits are clear:

1. More dynamism with a 100% carbon prepreg draping.

2. More stiffness thanks to the single-pass high pressure moulded monobloc.

3. No possible looseness between the parts thanks to the monobloc concept.

4. Significant weight saving with our floating foam mast.

5. Simple maintenance, repairs possible, and easily replaceable inserts.


1/ The 100% carbon prepreg draping is a model of its kind. The 50 layers on the mast and 155 layers on the fuselage are distributed in 5 angles to guarantee an incredible dynamism. The return to its initial shape after effort is 4 times faster than on a standard mast. 

2/ This huge part is produced in a 400kg mould, handled by powerful lifting tools to protect our workers. More than 4 hours are necessary to arrange all the layers in perfect order. Then comes the moment of closing the mould, always impressive in strength and precision. Finally, it is rolled in the heating press to compress it to 120 tons and bake it at 155°. A mast of rare stiffness will come out of it. 

3/ The looseness between the mast/fuselage/top plate parts is eliminated. Dismantling is no longer obligatory and galvanic corrosion is an old memory. The holes in the fuselage are through holes and mounted with anti-corrosion brass threads. You will be able to screw your wings firmly. A little thread lock in the inserts and your tightening is durable and protected. 

4/ The huge advantage of high-quality carbon is its stiffness. So, it is not necessary to put as much material as with other materials. In this way, we save a significant weight loss, almost 30% compared to aluminum. And more significant than the measured weight, the dynamism brings a sensation of liveliness and therefore incredible lightness. 

5/ A damaged insert: you can replace it in a few seconds for a few euros. Easy. 

A bump in the rocks: you repair your mast as you would do on your board. 

The Freeride set has a shorter Fuselage at the interlockings to be only compatible with our Kite Foil Front Wings.


Delivered in a high-quality bag, it is the Rolls of the monobloc masts. 

Treat yourself with a beautiful and hyper efficient carbon piece.

Technical sheet

Foil Allvator Carbon Mast 100 cm Freeride Monobloc 100 cm

  • Mast length: 100 cm.
  • Mast width: min 135,3 mm and max 150,3 mm.
  • Mast thickness: min 17 mm and max 18 mm.
  • Fuselage length: 35 cm.
  • Front wing insert length: 9 cm.
  • Length insert stab: 7,5 cm.
  • 4-hole top plate for a 16,5 cm longitudinal screw spacing and a 9 cm lateral screw spacing. It is compatible with all our boards equipped with a US double rail foil fastener, as well as 99% of the US foil box boards on the market.
  • Weight: 2,8 kg.

Buying guide

For whom?

It is the mast for the most demanding, careful users, fine technicians, because it is the best.

This foil is designed for experienced riders. We therefore invite you to take the greatest care of it and not to equip yourself with it if you are a beginner.

What is it for?

Its length of 100cm makes it ideal for wing and kite because it is the ideal compromise between the ability to put angle in curves without breaching, the margins in maneuvers, the management of choppy waters and the opposition angle at high speed.

Which carbon mast size?

Even if everything is possible, we mark here the main uses:

The 70cm:

  • In surf foil / sup foil: this is the key size. Absolutely perfect for the pursuit of performance.
  • In downwind: excellent choice which brings control and maneuverability.
  • wing: perfect for shallow water spots./li>
  • kite foil: useful in waves in shallow water.

The 85cm:

  • In surf foil / sup foil: it’s really big when rowing and not very pleasant in rail to rail.
  • In downwind: this is the perfect size for a high level of performance.
  • In kite foil: useful in waves in shallow water, and very versatile. The size that does it all.

The 100cm:

  • In surf foil / sup foil: to forget except in tow in the big…
  • downwind: it’s a little too big, very technical.
  • wing: perfect for going fast, never touching the water, maximum performance. What comfort!
  • kite foil: perfect for going fast, never touching the water, maximum performance. What comfort!

Which quiver?

This monobloc mast is suitable for all uses but we recommend mounting high performance wings on it to get the best out of it.

Foil positioning?

The more you move it forward, the more it pitches up the board.

The further you move it backwards, the more the nose of the board dives.

Be careful not to move it too far forward. We often tend not to let the back foot work, especially when we come from kite foil. However, moving the foil back a little forces more weight on the back foot and gives a more harmonious attitude and reduces the effort.

Equipments

  • Screw Kit.
  • Carry Case.

Delivery

Delivery delay

We indicate a preparation and shipping time of 3 working days. In reality, the majority of orders are shipped within 24/48 hours.

The delivery time, i.e. delivery time of the package to your home, then depends on the delivery location and the carrier.

We work with reliable and efficient carriers. 99% of shipments go perfectly and quickly. In the case of the remaining 1%, rest assured that we will do what is necessary with the carrier.

Shipping fees

Unlike other sites, shipping costs are not hidden behind the price of our products. You know exactly what shipping costs you, and you are not disadvantaged if you choose to collect your order at our GONG Space Center.

Shipping costs are calculated based on the weight and volume of each package, and your delivery address.

Tracking your package

Delivery tracking is managed directly by the carriers to whom we have entrusted your packages. They will contact you by email or SMS to allow you to choose delivery methods and follow the route of your package.

Carriers

We work with the best transport societies to deliver to you throughout Europe and the world within very short deadlines. We chose them for their quality of service and their compliance with deadlines.

For mainland France, 80% of your orders arrive at their destination in less than 48 hours of processing.

For Europe, delivery times vary from 3 to 6 working days, depending on the country of destination.

For the rest of the world, delivery times depend on transit time and customs clearance time. This delay depends on customs and can last from a few days to a few weeks depending on the destination and seasonality.

Please note, transport time is added to preparation/shipping time. Two companies collaborate on your order (GONG and the carrier). Each one masters its activity and is committed to optimizing its deadlines so that you are delivered as quickly as possible and at a reasonable price.

Eco-responsible packaging

Preserving the environment is an absolute priority. This is why we do everything possible to reduce our ecological footprint.

The most important thing is to sell quality, durable products that will be repairable and will please you for a long time.

For our shipments, we use:


  • Scotch craft paper.

  • Final packaging in high-end cardboard.

  • For rigid boards: Flexi-Hex, very high resistance ecological packaging.

This means:


  • Reusable and recyclable packaging.

  • An almost total reduction in single-use plastic.

  • Maximum protection and impact resistance for rigid boards thanks to the innovative Flexi-Hex honeycomb design (35mm thick).


Receipt of your product

Upon delivery, check the condition of your package in the presence of the carrier. A complete explanation email on the procedure to follow will be sent to you when your order is shipped.

Despite our requirements and all the care we take in the packaging and protection of your product, transport hazards may occur, and your product may suffer more or less significant transport damage.

Note that the products are protected in their carton. If you have any doubts, simply refuse delivery and contact us.

More infos

At GONG you won’t find any crazy assembly of parts from Foil copies thrown together by some Chinese guy and sold more expensive than us.

At GONG you will find the best quality at the price of direct sales without intermediaries.

Warning :

The practice of the sport Foil may expose you to serious injury. A poor mastering of Foil may lead to cut, serious injury and/or including death for you and/or others.

Foil should be practiced by taking into consideration all kite user precautions that are associated with  the sport Foil. Remember that a Foil is long, cutting, and reaches high speeds. Getting hit by a Foil, or hitting someone/thing can have dramatic consequences.

Always Foil far from others, in a secure and safe waterscape without obstacles.

Foil is most often practiced in light winds which may cease to blow leading you to return to shore by swimming. As a consequence do not overestimate your your strength/capacity : never go further out than your skill and swimming capacities and wind conditions allow.

Always wear a helmet and life vest for floatation. Always wear a full body wetsuit.

When handling the Foil, be careful not to cut yourself along the edges.

GONG is NOT responsable in case of any and all accidents implicating a Foil GONG. The practice of Foil is undertaken under the complete responsability of the Foil User/Practioner.

-70%
heart heart-full
heart heart-full
heart heart-full
GONG | Protective HelmetGONG | Protective Helmet
XS S M L
heart heart-full

Protective Helmet

A well thought out and adjusted protective helmet.
Regular Price 25€
Sale Price 25€Regular Price
heart heart-full
heart heart-full

Impact Vest

The top of the line impact vest for wing and tow.
Regular Price 99€
Sale Price 99€Regular Price