GEAR: V3 ATMO FOILS: BUILD YOUR GLIDE

News
Kite foil
Lowkite
Pumping
SUP foil
Surf foil
Wing

30 july 2026 0

A completely redesigned range, all-new models and revolutionary tail shafts!

V3 Atmo is a complete redesign of our foils, from the way they're engineered to the way they're manufactured.

New designers, new calculation methods, new shapes, new materials, new moulds and new finishing standards: we've brought together the industry's leading specialists and the most advanced manufacturing tools to gain nearly 20% more efficiency across our new range.

Every profile, every outline, every tip, every transition and every trailing edge has been completely recalculated, simulated, tested and validated. The result is immediate: more glide, more speed, greater precision, enhanced control and less wasted energy.

The range now covers every discipline with an unprecedented level of specialization: progression, freeride, wave riding, light wind, pump foiling, downwind, surf performance, surf freestyle, slalom and race. The new Team and Pro Team models push the limits of every discipline, while our most proven V3 shapes become the new Perf Series.

The ultimate customization: V3 Atmo also revolutionizes the rear end of the foil. Tail Wings, Tail Shafts in Short, Medium or Long, Upper or Lower architectures, together with Shim Tails from +1° to -3°, unlock nearly three million possible configurations, allowing an unprecedented level of tuning precision without any hydrodynamic compromise. It's simply beautiful.

And because innovation shouldn't make your recent equipment obsolete, we've retained the V3 mechanical standard for fuselages, front wings and masts, as well as the existing Tail Wing interface. You can upgrade your foil at your own pace without rebuilding your entire quiver, without changing your mast, without replacing your fuselage, while continuing to use your V3 wings... Simple and easy, on your own schedule.

A new range. A new R&D department. A new benchmark in foil performance.

Welcome to the V3 Atmo era.

A complete reinvention of the range!

The V3 Atmo range is far more than an evolution. It redefines both performance and the foiling experience. It represents a complete break from the previous generation:

Entirely redesigned shapes across the whole range: front wings, stabs and tail wings.
A whole new level of glide that elevates every foil in the lineup.
Six all-new models: Veloce Light Wind, Veloce Freefly, Veloce XTR, Hyper Trail, Supra Trail and Ypra Carve.
A new generation of Tail Shafts, redesigned with both Upper and Lower versions.
Aluminium and Titanium Shim Tails for even finer tuning and maximum precision.
True custom-level choice with more than 3 million possible configurations.
A new Micro V3 Atmo fuselage for the Ypra Race foil, also adopted for the new Ypra Freestyle V3 Atmo.

Pump foiler: Valentin, GONG staff, riding the Donut HDCC 91, HM77/19 mast, Titanium Pro Color fuselage, Hyper Trail V3 Atmo XXL front wing, Carbon Tail L, Titanium Shim Tail 0° and Hyper Trail V3 Atmo Tail Wing in size L.

Step into a new era with Atmo foils

The Atmo range represents a complete recalibration of V3 foil efficiency. Every V3 Atmo front wing, stab and tail wing has been redesigned to deliver an unprecedented balance of performance, ease of use and control.

The defining characteristic across the entire range is exceptional glide. Take-off happens earlier, lift remains smooth and efficient, allowing riders to reduce wing sizes throughout the range without sacrificing comfort. Less surface area means less drag, higher average speed and greater top speed, while maintaining an incredibly forgiving foil. Your Atmo foil keeps flying where many others stall, giving you more time to complete your manoeuvres and valuable control in every situation.

This level of precision on the water is made possible by a complete overhaul of both engineering and manufacturing. Every V3 Atmo wing is designed in 3D, digitally optimized, validated by Team GONG and manufactured in our new production facility to unprecedented precision standards. Profiles, trailing edges, transitions and interfaces are produced with exceptional consistency to maximize glide, reduce hydrodynamic disturbance and ensure every foil delivers identical performance.

Surf foiler: Malo, GONG team rider, riding the Scura FSP Pro, HM77 V3 mast, Fluid V3 Atmo front wing, Carbon Tail M, Titanium Shim Tail 0° and Ypra Surf V3 Atmo tail wing.

Three construction levels:

V3 Atmo foils are available in three ranges featuring distinct technologies:

The Perf Series, identified by its white logo, combines accessibility and performance with a fiberglass construction.
The Team Series, featuring a blue logo, uses a high modulus carbon construction with a 12K Carbon Clear finish for maximum stiffness and efficiency.
At the top of the range, the Pro Team Series combines the very best of our high modulus carbon technology with an exclusive 3K Carbon Texalium Purple Clear finish, the signature of our expertise and exacting standards.

Overview of the Atmo front wing range

The new Atmo range features 24 front wings, including two front wings using the new Micro V3 fuselage!

Perf Series Front Wings

The highly accessible Perf Series front wing range now includes the Veloce and Sirus, with shapes specifically optimized for fiberglass construction:

Wing foiler: Malo, GONG team rider, riding the HIPE Perf, Neutra Boom, Alu V3 mast and X-Over V3 Atmo foil.

Team Series Front Wings

The Team Series front wings, available exclusively in HM Carbon, form the heart of the Atmo range with completely redesigned shapes and all-new models.

The flagship models in the range benefit from major shape developments that dramatically increase glide and control. Everything feels smoother, faster and more intuitive on foils that encourage you to reduce surface area more than ever.

Foiler: Malo, GONG team rider, riding the Cruzader Diamond FSP Pro, Neutra V3 lowkite, HM85 mast, Titanium Color V3 fuselage, Fluid V3 Atmo front wing and Fluid V3 Atmo stab.

Pro Team Series Front Wings

The Pro Team Series front wings embody the most advanced expression of our expertise and our vision of foiling. Designed for demanding riders, they deliver the level of performance expected by those looking to push their limits and exceed their own expectations. This range is built around one simple ambition: to pursue excellence and turn it into reality on the water.

Wing foiler: Malo, GONG team rider, riding the Hyperloop FSP Pro, Droid Aramid X, HM85 mast, Micro V3 fuselage, Ypra Freestyle V3 Atmo front wing and stab.

Overview of the Atmo stabs and tail wings

The Atmo stabs and tail wings have also been completely redesigned with optimized shapes and new models.

Perf Series Stabs

Built in fiberglass, these one-piece stabs pair perfectly with your Perf Series front wing to create a balanced and accessible setup.

Team Series Stabs and Tail Wings

Discover completely new one-piece stabs designed to unlock the full potential of your front wing, along with a new Trail tail wing to customize the tuning of your pumping setup.

Pro Team Series Stabs and Tail Wings

This range now includes tail wings designed to pair with the new Veloce DW, Veloce XTR and Ypra Carve, as well as one-piece stabs compatible with the Micro V3 Atmo fuselage for the Ypra Race and Ypra Freestyle.

Surf foilers: Bastien and Malo, GONG team riders, riding respectively the NOTW EPS Pro with an HM mast, Curve V3 Atmo front wing and Curve V3 Atmo stab, and the Matata FSP Pro with an HM mast, Fluid V3 Atmo front wing and Surf-Freestyle V3 Atmo stab.

New aluminium or titanium Tail Shims!

The V3 Atmo Shim Tail redefines Tail Wing incidence adjustment by replacing the basic plastic shim with a genuine high precision structural component featuring a micrometric fit.

Machined from metal and perfectly profiled, it creates a rigid and continuous connection between the Tail Shaft and Tail Wing. Its hydrodynamic design integrates the adjustment directly into the foil profile, reducing flow disruption while improving stiffness, steering precision and overall durability.

Available in +1°, 0°, -0.5°, -1°, -2° and -3°, it lets you fine tune the foil's behaviour with exceptional precision. Just a few tenths of a degree can transform front foot pressure, take-off, pop, repop, pumping, turning radius, stability and glide.

Each angle is available in two configurations:

Upper, offering greater protection for the Tail Wing during contact with the bottom.
Lower, positioning the Tail Wing farther from the surface and the wake of the Front Wing to reduce ventilation and optimize hydrodynamic efficiency.

Tail Shafts are naturally specific to V3 Atmo and Micro V3 Atmo fuselages. Shim Tails, however, remain compatible regardless of your foil's fuselage. Just make sure you select the correct Upper or Lower version for your setup.

Key trends across the Atmo range

The development of the range follows four clear priorities: more glide, a wider wind range, a structured pump foiling lineup and broader access to high performance.

Glide at the heart of foiling

Glide is the defining principle of this new generation of foils. The entire range has evolved to deliver greater efficiency, freer glide, improved speed retention and the ability to make the most of every available source of energy.

The new Veloce Freefly is the perfect example, delivering immediate, precise and intuitive glide. But the real achievement goes even further. It also offers greater control and speed for a more composed ride in every condition. The iconic Fluid, renowned for its rail-to-rail performance, also takes a major step forward in glide, with even more efficient flight that extends your lines and reduces effort.

Foiler: Malo, GONG team rider, riding the Cruzader Diamond FSP Pro, Neutra V3 lowkite, HM85 mast, Titanium Color V3 fuselage, Fluid V3 Atmo front wing and Fluid V3 Atmo stab.

An even wider range of use

The new Veloce LW perfectly embodies this evolution. Designed for early take-off while maintaining excellent speed potential, it offers an outstanding range of use. A single wing lets you ride in a wider variety of conditions, with easier take-offs and no compromise on performance once up to speed.

Wing foiler: Patrice Guénolé, GONG boss and shaper, riding the Cruzader Point LW FSP Pro, Neutra Light, HM85 V3 mast, Veloce Light Wind V3 Atmo front wing and Fluid V3 Atmo stab.

A complete pump foiling range

Pump foiling has become a discipline in its own right and now benefits from a fully structured range. Every style of riding has its own dedicated foil, from accessible pump foiling to the pursuit of maximum performance.

While the Trail Perf Series remains the most accessible foil, the new shape of the Trail Team Series delivers significantly greater efficiency, especially in glide, while preserving the accessibility of the V3 model.

The new Sirus gains in versatility. It is the wing for taking off extremely early and staying in flight with minimal effort in wing foiling, lowkite, SUP foiling or surf foiling. In pump foiling, its characteristic balance of lift and glide lets you cover impressive distances with complete confidence. The wing loads up early, lifts the board and gives you time to establish your rhythm.

The Hyper Trail opens up a whole new world: dynamic and playful pump foiling. Designed for fast dockstarts, pumping slalom, explosive accelerations, flat water carves, buoy turns and rapid changes of direction, it prioritizes speed, acceleration and rail-to-rail performance. More reactive and lively than the Trail models, it turns every course into a playground.

Above it, the Supra Trail and Ultra Trail follow a different objective: maximizing long-term efficiency. The Supra Trail optimizes glide, stabilizes your rhythm and makes long distances easier with remarkable efficiency. The Ultra Trail is the ultimate expression of this pursuit of efficiency, designed to push the limits of endurance and achieve the highest levels of performance.

Pump foiler: Valentin, GONG staff, riding the Strada HDCC, HM mast, Titanium Pro fuselage, Ultra Trail V3 Atmo front wing, Carbon Shaft M, Titanium Shim Tail 0° and Ultra Trail V3 Atmo tail wing.

Unprecedented access to ultimate performance

With the new Pro Team range, performance is no longer reserved for a handful of specialists. The Veloce DW, Veloce XTR and Ypra foils bring together our most advanced developments to deliver unprecedented efficiency, speed and refinement.

This new generation gives the most demanding riders access to sensations previously reserved for professionals, while retaining the reliability and versatility required for everyday use.

Kite foiler: Thomas, GONG staff, riding the Rumble HDCC, Unik Team Series kite, Ypra Freestyle XXS V3 Atmo front wing, Ypra Freestyle XS V3 Atmo stab and Micro V3 fuselage.

A range already crowned with a World Title and a World Cup victory

Even before its official launch, the V3 Atmo range had already proven itself at the highest level of international competition in the hands of our team riders.

In Downwind Parawing, Bastien Escofet became World Champion riding V3 Atmo foils, using a Veloce XTR setup in the long-distance races, where its efficiency and glide made the difference, and the Ypra Slalom on the most technical courses, where speed, precision and control were decisive.

In Freestyle, Benjamin Castenskiold made a spectacular return to the top with a victory in Tarifa, before making history with the first-ever perfect 30-point heat at the Spain Cup. He capped off the season by claiming the World Title with a Ypra Freestyle V3 Atmo setup and Micro V3 fuselage!

These results validate the engineering choices that guided the development of the range: optimizing speed, glide and control to create foils capable of performing at the highest level in every condition.

Wing foiler: Benjamin, GONG team rider, riding the Hyperloop FSP Pro, Droid Aramid X, HM85 mast, Micro V3 fuselage, Ypra Freestyle V3 Atmo front wing and stab.