-10%

V3

Foil X-Over V3 - Alu 70

Name: Pack - Foil X-Over V3 - Alu 70
Brand: GONG
SKU: GON25FOIPCKWINXOVER-70ALU
Price: 399.17 EUR
Availability: InStock

The ultra fun foil to learn then progress in Surf Foil!

See Description

399,17€

399,17€ ~~448,33€~~

-10%

Foil Front Wing X-Over V3

Preorder
Foil Stab X-Over V3

Preorder
Foil Alu Mast 70 cm V3

Preorder
Foil Alu Top Plate V3

Preorder
Foil Fuselage V3

Preorder
Foil Alu Mast Fuselage Connector V3

Preorder
Foil Wrench T30

Preorder
Deep Foil Bag

Optional Preorder
Foil Cover Front Wing R

Optional Preorder
Foil Cover Stab R

Optional Preorder
Tikal

Tef-Gel 10G

Optional Preorder

Complete your order :

Foil Cover Fuselage

Foil Cover Top Plate

Foil SCS Nuts Foil Boards

Configure

ref : GON25FOIPCKWINXOVER-70ALU

Description

Program

The ultra fun foil to learn then progress in Surf Foil!

Presentation

The X-Over will be your first wing for learn to take off, theft And engage in your first maneuvers.

The X-Over is the front wing reassuring which will facilitate your first flights in foil, whether in wing, in Surf foil, in SUP foil or kite foil.

Its ultra -soft takeoff, stability, control and predictable character make it forehead wing Perfect for learning quickly pull from the edges in wing or kite, or make your first beautiful diagonals in Surf Foil or Sup Foil.

The X-Over excels in all areas where it is asked during the progress. It allows you to fly early, to have fun, to pump, to make beautiful turns and to go fast compared to its volume. It is an accessible shape, efficient for its volume and which will excel in All the disciplines of the foil : Wing, Surf foil, SUP Foil, dockstart ...

The great strength of this front wing is its versatility over time. Perfect for your first flights, its skills and tolerance qualities will allow you to go very far in your progress without changing your foil. Nothing is forbidden to him so make you happy for a long time with a front wing confidence that you will know by heart.

With sound Early and soft takeoff, no need to get upset on the wing : Everything is done very naturally. The wing is healthy and does not create excessive push up. We are not forced to put all our weight on the foot before to stabilize. It’s really the perfect wing to discover the feelings of the foil.

His very modern profile gives him a large range of use to allow him to fly at very low speed without winning but also to accept impressive speeds for this kind of shape.

The X-Over is very stable but is not locked. Thanks to its twisted tips and its negative dihedral, it is really a playful but very healthy foil that rocks from one rail to another very easily. It’s really a foil that will accompany you for a very long time in your progress without ever lining up.

In wing, The foil is completely forgotten: no need to be ultra focus on support. It allows you to focus more on the wing. For Many beginnersIt is a real comfort to be able to focus almost only on the handling of the wing.

In surfing, the X-Over is ultra tolerant. When we discover the power of the waves and we do not yet know how to place the foil perfectly in the power zone, we need a docile and predictable foil. This is exactly the qualities of the X-Over. Once this stadium has been validated, its maneuverability Allows you to make real surfing turns. This front wing really excels in soft waves and average conditions To the point that some members of the Team Gong prefers it to other models for its maneuverability / lift ratio. We turn hard and we easily pump even with a small surface.

His pumping is ultra easy and very tolerant. It’s an incredible wing to start in Dockstart or make your first Surf Foil connections! The movement to be provided is very vertical, and very "cool"; Ideal for discovering the gesture of pumping.

The Alu X-Over foil is delivered with:

A Front Wing X-Over V3 with a stabilizer X-Over V3.
THE V3 aluminum mast and the Fuselage V3 are delivered with the MAST Fuselage Connector V3 For a conical assembly without play.
The 4 -hole platinum, with standard cans, will offer you a perfect connection between your foil and your board.
The full screws kit with clamping key is provided.

Front Wing

The X-Over is the front wing which transforms your beginnings into a foil into a fluid and intuitive experience.

With a design designed to support each step in your progress, it ensures a easy handling with its exemplary stability.

From the first moments, the X-Over seduced by its Predictable and reassuring takeoff : it rises flat, without suddenly pitching, and allows you to focus fully on its supports.

Stab

The stab X-Over V3 facilitates learning foil.

Its Exceptional stability And its tolerant behavior allow an intuitive and reassuring grip, essential for building solid bases.

Upon takeoff, the X-over V3 reveals its assets: it promotes a perfect balance Between the front and the rear foot, removing unpredictable behaviors that could destabilize beginners. This quality makes it the ideal ally for Discover the sensations Foil without stress, whether it is wing, Surf foil, SUP foil or even dockstart.

Mast

The Aluminum mast V3 70 cm is a reference for riders looking for versatility.

Its length makes it an ideal choice for Surf Foil, the SUP foil or wake foil, where he excels thanks to a Perfect balance between stability, maneuverability and performance. This mast is long enough to offer a pleasant slide and good control, while remaining accessible to progress serenely. It is also suitable for experienced riders looking for reliable material for various practices.

In wingfoil, this mast is an interesting option for beginners. With its 70 cm, it offers sufficient height to limit errors while allowing to navigate with good control.

A more efficient foil shape

One of the key elements in the evolution of this range is the complete redesign of our foils to increase their structural and hydrodynamic qualities.

The V3 fuselage is:

faster
more rigid
more resistant
lighter

The new round shape allows a 12% gain in glide and the thicker section approaching the stab increases the strength and rigidity of the foil.

Hours of calculations on extremely powerful computers have allowed us to optimize the smallest detail to maximize performance. The fillets of all our connections have been carefully studied and adjusted to minimize hydrodynamic disturbances and increase the rigidity and resistance of the assembly.

SuperLock self-tightening system

The SuperLock self-tightening front wing connection has been designed to guarantee perfect tightening even after hours long sessions.

The more pressure you put into the front wing, the tighter it fits into the fuselage.

The pressure angle makes it very easy to disassemble the front wing, even after long sessions.
This fitting only requires two screws under the FW, which makes changing the front wing easier and faster.

This tightening principle, already validated for several years on our V2 stabs, is now available in an optimized version on the front wings.

A real plus for daily use!

Retro fitting

The entire range, from the fuselage, to the mast, to the front wing and the stab, has been revised to radically boost the performance of our foils, without being limited by our old connection shapes.

However, this choice to change all of our parts could not be considered without continuing to offer compatibility with our old ranges.

We therefore offer a wide choice of fuselages which gives you the freedom to mix all our masts, front wings and stabs, whatever their generation.

Buying guide

For whom?

Have you seen guys having fun on the spot and you also want to get started? The X-Over is a perfect front door to start and evolve on all supports, whether in wing, in kitefoil, in foil surf or in SUP Foil!

For what ?

Discover the world of foil, stabilize the flight, send your first maneuvers, but above all to have a versatile foil that works in all conditions and with all supports!

In the detail of each "sport":

In wingfoil : The X-Over will simplify your life on takeoff, teach you to stabilize the flight, go back to the wind and take you to the success of the Jibes, tacks and your first jumps!
In Surf Foil : X-over is perfect for a soft and progressive take-off, good turns on the wave and make its first connections with the following waves by pumping.
In dockstart : The X-Over will be perfect for a successful starts and start to make nice distances to the strength of the legs.
In kitefoil : The X-Over will be perfect for your first sides in flight without going to Mach 12 and being afraid, and to learn the transitions in flight.

What size?

Front Wing :

The front Wing X-Over are aimed at all templates.

There M made 74cm major, 850 cm2

In wing, It’s a small wing for light templates.
In Surf Foil, this is a small wing for light templates.
In kite foil, it is a very versatile wing which even carries at very low speed.

There L Made 84cm major, 1108 cm2.

In wing, It is an average wing for less than 75kg.
In Surf Foil, this is an average wing for less than 75kg.

There XL Done 95 cm major, 1410 cm2.

In wing, It’s a big wing for templates from 75 to 85kg.
In Surf Foil, this is a large wing for templates from 75 to 85kg.

There XXL Made 106 cm major, 1747 cm2.

In wing, It’s a big wing for templates over 85kg and the Light wind.
In Foil surf, this is a large wing for templates over 85kg and small waves.

Generality: we will use a larger wing in low beaches, soft conditions. And conversely, a smaller wing in muscular conditions. What should be remembered is that the choice of your wing depends on your template which requires lift and your average speed that generates lift.

Stab:

The X-Over stabs are very simple. Choose the size you usually like at Gong.

Always adjust the stab size to the size of the front wing For a balanced flight.

The L does 40 cm Large, 236 cm2, 6.6mm thick.

In Surf Foil, it is a Stab that will suit the majority of the foilers of medium Gabarits.
In wing, It’s perfect for manifood riders who are looking for versatility with a very good low beach.
In kite Foil, he's a big stab for strong riders.

The XL does 44 cm Large, 280 cm2, 7.2cm thick.

In Surf Foil, this is a large Stab for strong templates and large wings.
In wing, It’s a big stab for strong templates and large wings.
In kite foil: to forget, it's too big.

Mast:

Alu Mat 55 cm : Short and almost without lever arms, it is ideal for starting when you want to go quietly, surfing, wake, in SUP, or in wing ; or in shallow waters.
Alu mat 62 cm : Perfect for progress without stressing, to be reserved for your beginnings because it will not offer the height margin to progress far.
Alu mat 70 cm : “Standard” length in surfing for a simple balance and a good mix of carving and pumping. A key size in surfing, wake, and SUP. Nice at first in wing so as not to stress.
Alu mat 77 cm : The most efficient size in surfing and SUP To Carver. Great in pumping too, it's a little short mast to be at the top in wing But that some use in the waves for more control and pass in little water, or for beginnings and a more serene progression.
Alu Mat 85 cm : Reference length in wing For a practice ranging from freeride to surfing via freestyle to the highest level, offering the best performance mix. Top in kite for maximum control, in Big Air for example. Great in Tow in Surf.
Alu mat 92 cm : Perfect in wing For the freeride or approach the breed, it is great in waves for solid Speed solid carvings. Perfect in kitefoil, it offers the small margin in addition in restless conditions.

The mast must be associated with its plate Top Plate Alu V3 and his MAST Fuselage Connector V3 To be complete. To guarantee you take advantage of your aluminum parts in the durably, we recommend that you use GEL GEL throughout the screws.

What quiver?

With an X-Over, a aluminum mast is enough because the scope of these wings is compact. But it is obvious that with a carbon mast You will gain a lot of stiffness, especially on for tight curves with large sizes like the XXL.

In Surf Foil, you can use any board in our range, depending on your surf level and your physical condition. The spear Will be perfect on your first sessions but it can very well be used with a shorter perfoat.

Ditto in wing, A beginner will rather appreciate a long board to take off easily but we will try to reduce the length for maneuvers and to manage the clapot.

In Downwind in SUP foil, it will work very well with a Zuma which will allow you to have a very soft takeoff on the wave.

Positioning of the foil?

For Gong foils, place the plate in the middle of the US rails.

The more you advance it the closer it is. The more you get it back, the more the nose of the board plunges.

Be sure not to move it too much. We often tend not to let the back work work, especially in kitefoil. Now back up the foil a little forces more weight in the rear foot and gives a more harmonious attitude and reduces efforts.

Equipments

1 front wing X-Over V3 (choice of size)
1 Stab X-Over V3 (size granted to the front wing)
1 mast alu V3 85 - 17mm
1 mast fuselage connector v3 to connect the mast to the fuselage
1 aluminum fuselage
1 aluminum top flat v3 to fix the mast to the board
1 T30 T30 key
4 brass squares M6
4 M6 bowl
7 M6x30mm screws (mast screws)
3 M6x50mm screws (fuselage screw)
4 M6x25mm screws (wings screws)

Delivery

Orders are prepared and shipped quickly: most are dispatched within 24 to 48 business hours.
The delivery time, meaning the transit of the parcel to your address, then depends on the delivery location and the carrier.
Shipping costs are transparent and calculated based on weight, volume, and delivery address.

View all our delivery FAQs.

Exchanges & Returns

You have a 14-day right of withdrawal to return or exchange a new product that does not suit you.

View our returns FAQs.

Eco-Responsible Packaging

We prioritize sustainable, recyclable, and reusable packaging solutions, minimizing single-use plastic as much as possible while ensuring optimal protection for products, including large items.