How To

Change the bladder

If your wing doesn’t seem to hold the pressure anymore, first check if a leak is coming from the central...

Reconnect a one-pump system

In this video, we show you how to reconnect the One-Pump system of your wing or kite. Did you accidentally...

How to

Intermediate

Kite

Stall roller

It’s the opposite of the beautiful fluid Roller. It consists of pitching the board at the finish, on the lip,...

Roller to tail release

Add some spice to your roller by finishing in pure glide on the nose of the board! A big roller...

How to

On land

Wing

Mounting a harness connector

Riding without a Harness is sexy because it makes you feel free. We can move in all the directions, and...

Off-the-lip

It consists of smacking right under the lip, and getting as vertical as possible. One must hear the lip slapping...

How to

Wing

Choosing the bladder compatible with your wing

The new designs of our wings enhance bladder inter-compatibility across our different models! For even greater ease of use and...

How to

Intermediate

Kite

Re-entry

The Re-entry is a must have move. It consists of projecting yourself up a section of foam that’ coming towards...

How to

Intermediate

Kite

Hardcore re-entry

This move is somewhere between : the Roller, the Off the Lip and the Re-Entry. Indeed, it consists of smacking...

How to

Expert

Surf

Drop wallet layback

Unleash power and style in the most theatrical way with a fully committed layback, hanging on by just your big...

How to

Intermediate

Kite

Re-entry 360°

A combination of Re-Entry and a 360 ° Tail Slash, the re-entry 360 ° is a real styley way to...

How to

Intermediate

Kite

Cut-back

Sometimes called the S turn, the cut back is a replacement maneuver. Clearly if you continue to ride straight you...

Securing your gear on land

The forecasts announce good conditions and here you are now on the beach preparing your gear to go ride. The...

Assess the difficulty of getting through the waves

Before hitting the water, it's important to gauge the challenge that lies ahead. Wing foiling is one of the most...

Removing the fuselage from the mast

Here are some tips for dismounting the fuselage from your mast without difficulty. The connection of our mast with its...

How to

On land

Wing

Deflate your wing

You start by putting your wing on the extrado on a safe spot: no thorns, bits of glass, people who...

How to

On land

Wing

Dry your wing

Unless you end your session with a long ride in the sun and land on a pontoon, it’s rather rare...

Cut your fixed-length paddle?

Here’s how to cut your shaft and glue the handle of your paddle. We offer a paddle-cutting and handle-gluing service...

How to

On land

Wing

Sanding a damaged trailing edge

Reduce the risk of cuts on chipped fibers of the trailing edge by sanding it with a sanding block. ...

Carrying your gear on land

Description You arrive at the spot and your gear is ready. Next step is to carry it to the water...

Repair a leak with zero flats

In case of micro leaks or "pinholes" on a HIPE, I-SUP, or First inflatable board, Zero Flats is the solution!...

3

How To

Change the bladder

Reconnect a one-pump system

Stall roller

Roller to tail release

Mounting a harness connector

Off-the-lip

Choosing the bladder compatible with your wing

Re-entry

Hardcore re-entry

Drop wallet layback

Re-entry 360°

Cut-back

Securing your gear on land

Assess the difficulty of getting through the waves

Removing the fuselage from the mast

Deflate your wing

Dry your wing

Cut your fixed-length paddle?

Sanding a damaged trailing edge

Carrying your gear on land

Repair a leak with zero flats

Join Us

Meet us