Factory Kite Surf Lethal 5'6 FSP 2X
Our 100% Radical Sideshore Shape.
Introduction:
The Lethal is THE Kite Board for throwing it down heavy in good conditions. With its point nose and its round tail, its 100% Shortboard for extreme carving. The perfect pivot, an agility and rail to rail that’s just incredible.
In the Surf, it is made for the best of conditions. It works well in hollow waves thanks to its precise drive. It’ll give you the confidence you need for throwing down the most radical of moves and for projecting yourself up the sweetest wave faces in serenity.
Built in FSP 2X for a better compromise between weight/solidity and equipped with a 3D Function Pad that covers 2/3rds of the deck for comfort and maximum grip. The 3 Boxes are FCS II, for more rigidity and easier, tool-less, in and out.
To get to the point: it is the Board for the sickest turns!
Ideal Conditions:
- Ideal wave size: shoulder to bring it on !
- Strength: at its best in high strung cranking waves.
- Type: all conditions, even in chop and wind.
Ideal wind range:
- Less than 75 kg: 14 nds -> your personal maximum.
- 75 kg to 95 kg: 16 nds -> your personal maximum.
- More than 95 kg: 18 nds -> your maximum.
- Skill minimum: proficient.
GLOBAL
- Rocker: lifted for maximum versatility.
- Rails: hard at tail and round up front for feeling 100% modern.
- Volume: thin for mad performance.
- Outline: tail ultra versatile, thin nose. 100% shortboard.
- Tail: round tail for some sumptuous pivots and rail to rail pitch.
- Nose: point nose that doesn’t stick in barrels and doing tricks.
Technical sheet
Factory Kite Surf Lethal 5'6 FSP 2X 5'6
- Length: 5’6 = 168,0 cm
- Width: 17 13/16″ = 45,3 cm
- Thickness: 2 1/16″ = 5,3 cm
- Volume: 21 litres
- One foot off nose: 12 5/16″ = 31,3 cm
- One foot off tail: 14 1/8″ = 35,9 cm
- Rocker total: 17,7 cm
- Tail: round tail.
- Nose: point nose.
- Fins: tri-fin.
- FSP 2X Weight: 3,0 kg (weight margins + or – 5%).
Equipments
- 3 FCS II Glass Flex Fins for Tri-Fin mounting.
- 2 lateral boxes, 1 central box FCS II, high resistance permitting trifin mounting.
- New 3D Function: front pad + tail pad + boomerangs, 5 mm thick, grooved, installed during fabrication and procure absolute comfort and adherence.
- Inserts, screws and washers included for mounting your straps (straps not included).
- Concrete Fixed Plug at tail.








