High-end materials: EPS blank, Epoxy resin, fiberglass. Materials chosen for their suitability to the requirements of our specifications.
100% Epoxy resin board on EPS foam blanks of 28kg/m³ (with 3mm wooden stringer).
Deck detail: 2 layers of 6oz fiberglass, 1 layer of 4oz fiberglass.
Detail of the hull: 1 layer of 6oz fiberglass, 1 layer of 4oz fiberglass, plus 1 patch of 4oz fiberglass reinforcement covering the tail and fin boxes.
Preshape with digital control, shape control using traditional templates, 100% hand finishing.
Matte finish for better glide, less susceptibility to scratches and a comp look.
This technology is easily repairable in the event of a ding, and has an excellent strength/nervousness/weight ratio highlighting all the technical qualities of the shape.
It is THE modern technology, in fiberglass or carbon, currently popular with the most technical surfers looking for the best performance.
These boards are 100% shaped and glassed in our factory in Asia which strictly replicates our methods developed and tested in our workshop in France.
