SAV Pagaies - HANDLE CARBON ERGO LARGE vs HANDLE CARBON PRO

1fox
Messages : 37
Inscription : mar. mars 15, 2016 12:11 am

SAV Pagaies - HANDLE CARBON ERGO LARGE vs HANDLE CARBON PRO

Message par 1fox » sam. avr. 08, 2017 3:59 pm

Hello,

I'm refurbishing my old quickblade paddles, which are leaking in the handles.
It's a delicate job since they are glued with strong araldite and they are cut to my size (surfing config).
The only way I found to remove, was gently using a Lathe.

I recently bought a Carbon Pro 8" non cut and I found that the dimensions of the carbon pro handle are perfectly suited to the quickblades.
Today I was going to buy 2 units, but a doubt arises?

A) What's the difference between the HANDLE CARBON ERGO LARGE and the HANDLE CARBON PRO?
They seem equal (except for the shaft connection)

B) I'm thinking about applying hot glue to my new Gong Carbon Pro (this is the default solution that came with my Kenalu). Is there any counter indication?

Thanks and have a weekend full of glassy waves :)

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: SAV Pagaies - HANDLE CARBON ERGO LARGE vs HANDLE CARBON

Message par coolas » sam. avr. 08, 2017 4:28 pm

1fox a écrit : A) What's the difference between the HANDLE CARBON ERGO LARGE and the HANDLE CARBON PRO?
They seem equal (except for the shaft connection)
If I am not mistaken, the Large has more volume and was standard on the earlier batches of Carbon Pros. The "bump" that fits in the palm is thicker and longer front-and-aft. I have small/medium hands and prefer the normal one, but it is a small difference anyways.

On the hot glue solution, I did not read of any problems. But unglueing a handle that was glued with epoxy or araldite is quite easy if you heat it with hairdryer: Carbon conducts the heat, and so the glue is easily melted, even through the shaft wall. 30 seconds heating were sufficient for the small 7" adjustable paddle for instance.
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

1fox
Messages : 37
Inscription : mar. mars 15, 2016 12:11 am

Re: SAV Pagaies - HANDLE CARBON ERGO LARGE vs HANDLE CARBON

Message par 1fox » sam. avr. 08, 2017 4:54 pm

coolas a écrit :
1fox a écrit : Carbon conducts the heat, and so the glue is easily melted, even through the shaft wall. 30 seconds heating were sufficient for the small 7" adjustable paddle for instance.

I was afraid that the temperature would destroy any bonding of the carbon matrix impregnation.
But you are an expert :)
Tried it right away and voi lá!

Image

Thanks Coolas

Avatar de l’utilisateur
robot
Messages : 1086
Inscription : jeu. sept. 04, 2008 12:52 pm
Localisation : Embajador Pals (Costa Brava)
Contact :

Re: SAV Pagaies - HANDLE CARBON ERGO LARGE vs HANDLE CARBON

Message par robot » dim. nov. 26, 2017 5:19 pm

Le shaft rond carbone est indisponible depuis de longs mois. Vous prévoyez d’en recevoir ou cet article est à enlever du catalogue?

Merci.
1m88, 78kgs - Alu 6'8 - Moodrive 9'0 - TenBlues 9'2" - CM 11'6" - CM tandem windsurf 15' - Wing Pulse 5m - Zuma 6'0 & foil carbon 100, XL Curve.
Embajador Catalunya. No dudéis en contactar para probar mi material

Avatar de l’utilisateur
Crafter
Messages : 3703
Inscription : mar. juin 12, 2007 9:53 pm
Localisation : Pornichet
Contact :

Re: SAV Pagaies - HANDLE CARBON ERGO LARGE vs HANDLE CARBON

Message par Crafter » lun. nov. 27, 2017 9:54 am

robot a écrit :Le shaft rond carbone est indisponible depuis de longs mois. Vous prévoyez d’en recevoir ou cet article est à enlever du catalogue?

Merci.
Hello,

Nous en avons reçu vendredi, ils seront en ligne très rapidement (nouvelle déco donc séance photo).

Merci
GONG Moderator...

Répondre

Revenir à « "Tout savoir sur les pagaies...", les sujets officiels »