proto one 6.8 X 90 lt vector

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

proto one 6.8 X 90 lt vector

Message par fp1369 » mar. mai 24, 2016 8:59 pm

After 10 session I can be (almost) sure: this board is really, bur really, the best allround all in one shortsup for Med.
I tested the board in micro and mini waves, in strong wind (over 27/28 knots) off shore, side shore and on shore. I used in perfect glassy conditions on reef perfect left (no pics, sorry) and on 40 cm windy on sand bank, from 30/40 cm to two mt and the board is simply perfect...
Great stability (no problem also in 30 knots on shore and iperchoppy conditions), almost no row (incredible for a 6.8), early take off, perfect in paddling (fast and stable), perfect on white foam going out, Nice nose rocker to avoid any problems also in critical sections. Turns is magic: the tail kick allows great handling in any sections of wave face, tight radius turns and great control in "big" waves. This board seems a mix between ONE and (old) fatal, two different expression of shortsup mixed in only one board. Now I understand the exit of " old fatal" from production boards (new fatal is a radical curve).
The feeling is really nice: closer than any other tech to a "normal" surfboard. Solid, but not hard as an xtr.
No pets on rails even if sometimes my paddle kisses them :D

The new handle gives a good confort carring it.
New deck pad and tail pad are really better than older.. i love.
In other terms.. I fallen in love :D
Only a thing: my board (different than normal ONE) doesn't seem a ONE. New board surfs well any waves, also micro, but "old" ONE 6.4 was really a bomb on 40 cm; new proto ONE turns easier, but is a little bit slower... but,m when the wave is bigger, old ONE isn't an easy board to turn :D.
This shape is a masterpiece: easy and radical board for all waves in shortsup dimension.
Image
Image
Image
Image
Image
Image
Image
Dernière modification par fp1369 le mer. mai 25, 2016 7:22 pm, modifié 2 fois.
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
Crafter
Messages : 3703
Inscription : mar. juin 12, 2007 9:53 pm
Localisation : Pornichet
Contact :

Re: proto one 6.8 X 90 lt vector

Message par Crafter » mer. mai 25, 2016 9:39 am

Thanks a lot for this report Filippo!
GONG Moderator...

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: proto one 6.8 X 90 lt vector

Message par coolas » mer. mai 25, 2016 10:10 am

fp1369 a écrit :(different than normal ONE)
Is it just a production 6'8" with less thickness, or are there other changes? (width, rocker,...)?
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

Avatar de l’utilisateur
Crafter
Messages : 3703
Inscription : mar. juin 12, 2007 9:53 pm
Localisation : Pornichet
Contact :

Re: proto one 6.8 X 90 lt vector

Message par Crafter » mer. mai 25, 2016 11:56 am

Hello,

les côtes sont différentes en largeur et épaisseur, le rocker est le même.

pour info il en reste 2 de dispo dans le shop : http://gongsupshop.com/epages/box1707.s ... 68VECPROTO

Merci
GONG Moderator...

Avatar de l’utilisateur
MagW
Messages : 1270
Inscription : lun. sept. 17, 2012 9:57 pm
Localisation : Sweden west coast

Re: proto one 6.8 X 90 lt vector

Message par MagW » jeu. mai 26, 2016 2:41 pm

Sounds great. I want One. It is my size!
What shape does the bottom have? V-bottom or concave or flat?

Are you still around 70kg Filippo?!?
/Magnus
22: NFA9'xs
21: NeverStick 9'8
20: Zero 8'5
19: 7'8 Karmen Pro
13: Sherpa BR 12'6
Carbon Racing S and Pro 7"
23: Mint 5’, HM85, CurveH-XL, H-L, FluidH45
23: Droid UP 4,5 & 5,5

Glasgo
Messages : 309
Inscription : jeu. sept. 20, 2012 9:35 am
Localisation : 76

Re: proto one 6.8 X 90 lt vector

Message par Glasgo » lun. mai 30, 2016 3:00 pm

Very interesting report as usual. It's good to heard You again !

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Re: proto one 6.8 X 90 lt vector

Message par fp1369 » mar. mai 31, 2016 9:01 am

Ciao,
yes, I'm around 70 kg
Board is really more stable than a normal 105/110 lt. My "old" ONE 109 has really less stability.
Image
Image
Image
Image
Image


Image

filippo
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
antoine44
Messages : 2077
Inscription : lun. avr. 15, 2013 4:19 pm
Localisation : La Baule (44)
Contact :

Re: proto one 6.8 X 90 lt vector

Message par antoine44 » mer. juin 01, 2016 10:34 am

Voici la fiche de ce proto qui a été fait en plusieurs exemplaire : http://gongsupshop.com/GONG-SUP-68-ONE- ... ORED-PROTO

quelques images de la board :

Image

Image

Image

Image

Image
Ambassadeur 44

SURF : 9'0 Moodrive EPS, 4'5 Matata foil EPS
SUP : 5'6 Flint
KITE : 5'0 Fatal / 10,5m Unik / 9m, 7m, 5m Freewave
WING : 4'6 Lemon / 5m, 4m, 3m Neutra

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: proto one 6.8 X 90 lt vector

Message par coolas » mer. juin 01, 2016 10:42 am

Est-ce que je me trompe, ou on peut dire que c'est une One "Mobifiée"?
Un peu comme les Fatals ont été "Curvifiées"...
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

Avatar de l’utilisateur
antoine44
Messages : 2077
Inscription : lun. avr. 15, 2013 4:19 pm
Localisation : La Baule (44)
Contact :

Re: proto one 6.8 X 90 lt vector

Message par antoine44 » mer. juin 01, 2016 10:48 am

Coolas on peut dire ça en effet avec moins de rocker qu'une mob mais plus que les one précédente.
En tout cas c'est comme ça que je le vois et je l'ai prise à la place prendre la mob 7'2 :wink:
Ambassadeur 44

SURF : 9'0 Moodrive EPS, 4'5 Matata foil EPS
SUP : 5'6 Flint
KITE : 5'0 Fatal / 10,5m Unik / 9m, 7m, 5m Freewave
WING : 4'6 Lemon / 5m, 4m, 3m Neutra

sashalasurfeuse
Messages : 1069
Inscription : mer. févr. 13, 2008 4:25 pm
Localisation : ambassadeur ciboure, côte basque

Re: proto one 6.8 X 90 lt vector

Message par sashalasurfeuse » mer. juin 01, 2016 11:10 am

superbe...ce n'est surement qu une impression mais elle fait plus mob que one...........
8 acidolly origin
9 phil grace all rounder
9'6 torq the don
sup 10 zero fsp pro

Avatar de l’utilisateur
speed85
Messages : 2159
Inscription : ven. nov. 09, 2007 6:40 pm
Localisation : mogette city, ambassadeur ! 86 kg

Re: proto one 6.8 X 90 lt vector

Message par speed85 » mer. juin 01, 2016 11:39 am

tu as vu la 7'2 mob au shop Antoine ??? alors ??? :-)
très belle cette one !
10' couine Inflatable , zuma 6'6eps , matata 3cs eps, 6'5 couine marie , Allvator foil M/XL PRO
6'3 karamba eps , 5'11 pie eps, 5'9 alu pu, 5'6 alu fsp
6.8 unik

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Re: proto one 6.8 X 90 lt vector

Message par fp1369 » mer. juin 01, 2016 1:20 pm

for sure is more allround than ONE xtr 2014.
old one is the best board ever in micro waves. new one has in his DNA something different: almost a mix one/fatal. The program of new board is really wider. Great in micro waves, of course, but surfs properly also bigger conditions. More confort in paddling, more stable, also easier (even if my board has 19 lt less than 109 lt of ONE 2014).
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

fabrizioSUP
Messages : 60
Inscription : lun. août 20, 2012 3:17 pm
Localisation : GENOVA - ITALY

Re: proto one 6.8 X 90 lt vector

Message par fabrizioSUP » mer. juin 01, 2016 3:08 pm

fp1369 a écrit : old one is the best board ever in micro waves. new one has in his DNA something different: almost a mix one/fatal.
But the mix one/fatal is the MOb 7'2 or I'm wrong.. Maybe the new One is a lower MOb??

What are the difference between them?
I have to know where to spend... :D :D
Fabrizio

NFA7 XTR (vendue) - Curve 7'6 XTR - Asylation 8 (vendue) - Mob 7'6 SP
Moodrive PU - Acidolly 8' (vendue)
Barland 6'10 egg
Matata Simone 5'6"

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Re: proto one 6.8 X 90 lt vector

Message par fp1369 » mer. juin 01, 2016 3:11 pm

Only Patrice can reply .. :D
I can say: the mix is really perfect. Easy, extra fun, radical.
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Répondre

Revenir à « Où l'on parle des prototypes GONGSUP »