Salut,
J'ai fait la modif ce matin sur ma XL Pro. On voit la différence effectivement. (Quand le fuselage est verrouillé sur l'établi).
Je vais attendre avant de le faire également sur la L Pro.
J'en ai profité pour faire le tour des tailles de vis. J'étais en M6x16 pour l'aile et le fuselage.
Ayant passé le dernier quart d'heure de ma précédente nav avec l'aille avant dévissée, très frustrant de se rendre compte que l'on n'arrive plus à rien, mais rassurant quand on remarque que c'est les vis en fait une fois arrivé sur la plage...
Je vais donc passer en M6x24. Ca n'améliorera pas le calage en debut de nav, mais devrait mieux tenir le serrage le temps de la session. (Je mets du gel aussi maintenant pour que ça prenne bien). Et en profiter pour passer en empreinte torx.
Bonne Navs !
New hole on Allvator wing pro clear
Re: New hole on Allvator wing pro clear
It's worth mention the screw length for the new top hole.
M6 x 16 for the bottom is good, but the top has to be a shorter screw like a m6 x 12.
Otherwise the a m6 x16 on top in the same hole will hit the bottom screw.
It's interesting that video shows the front hole being drilled and not the rear hole.
M6 x 16 for the bottom is good, but the top has to be a shorter screw like a m6 x 12.
Otherwise the a m6 x16 on top in the same hole will hit the bottom screw.
It's interesting that video shows the front hole being drilled and not the rear hole.
- Ours
- Site Admin
- Messages : 19800
- Inscription : mar. juin 12, 2007 11:50 am
- Localisation : La Baule / France
- Contact :
Re: New hole on Allvator wing pro clear
Hello,
don't drill 2 holes, and the front one is stronger.
Yes you need a M6 12mm on the top.
Thanks,
don't drill 2 holes, and the front one is stronger.
Yes you need a M6 12mm on the top.
Thanks,
GONG owner and shaper
Re: New hole on Allvator wing pro clear
The Allvator Pro I received from Gong now was pre-drilled in the other hole. Not the front hole.
/Magnus
22: NFA9'xs
21: NeverStick 9'8
20: Zero 8'5
19: 7'8 Karmen Pro
13: Sherpa BR 12'6
Carbon Racing S and Pro 7"
23: Mint 5’, HM85, CurveH-XL, H-L, FluidH45
23: Droid UP 4,5 & 5,5
22: NFA9'xs
21: NeverStick 9'8
20: Zero 8'5
19: 7'8 Karmen Pro
13: Sherpa BR 12'6
Carbon Racing S and Pro 7"
23: Mint 5’, HM85, CurveH-XL, H-L, FluidH45
23: Droid UP 4,5 & 5,5