HOW TO : install your FCS II fins !!!

Tout savoir sur comment surfer / All you need to know about how to surf.
WillySUP
Messages : 273
Inscription : mer. juin 17, 2015 9:50 am

HOW TO : install your FCS II fins !!!

Message par WillySUP » lun. juil. 22, 2019 12:21 pm

Voici un petit tutoriel sur le montage des dérives dans les box FCS2 :

1) Posez la planche sur le pont et prenez vos dérives.

2) Repérez la centrale (bombée symétriquement des deux côtés) et les latérales qui ont une face plane ou presque plane qui sera coté intérieur de votre planche.

3) Insérez la dérive centrale dans l’avant du box central et faites-la coulisser bien au bout du box. Puis basculez la en arrière pour la clipser.

4) Vous n’avez pas besoin de visser.

5) Voilà, les dérives sont installées, vous pouvez aller surfer.


Here is a small tutorial on mounting Fins in your FCS II boxes:

1) Put the board on the deck and grab your Fins.

2) Recognize the Center Fin (symmetrically curved on both sides) and the Lateral ones which have one flat or almost flat face which will be facing towards the inside your board.

3) Insert the Center Fin in the front of the central box and slide it well towards the front of the box. Then tilt it backwards to clip it.

4) You do not need screws.

5) Here, the Fins are installed, you can go surfing!!


Advisor : Patrice Guénolé et GONG Surfboards.

Image

Image

Image

Image

Image

Image

Image

Avatar de l’utilisateur
nico_hily
Messages : 197
Inscription : lun. sept. 24, 2018 6:50 pm

Re: HOW TO : install your FCS II fins !!!

Message par nico_hily » jeu. sept. 26, 2019 2:21 pm

Hello,

Certaines dérives en composites sont coupantes, il existe le fin puller, qui permet d'installer et retirer très facilement ses dérives.

https://www.gong-galaxy.com/produit/fin-puller/

8)
--§((GONG TEAM))§--

Répondre

Revenir à « SURF : Comment surfer / How to surf »