Pro SUP Foil stabs
GONG FOIL ALLVATOR STAB FREESTYLE HOur high aspect stabs dedicated to freestyle: pop, responsiveness and … Our high aspect stabs dedicated to freestyle: pop, responsiveness and solidity ++.
GONG FOIL ALLVATOR STAB PRO FLUID HOur easy high ratio stabs delivering high performance.
GONG FOIL ALLVATOR STAB PRO VELOCE HOur ultra high aspect stabs for maximum glide.Available on:
Showing all 3 results
The stabs have a major role. They determine the stability of the foil and help the lift, but at the expense of the maximum speed of the foil.
Thus, thick stabs are slower than thin stabs, but are much more load-bearing, and therefore effective at low speed. Rectangular stabs are more stable than stabs with fine points.
Understanding the different stability axes of your foil
To fly with total control on a foil, you have to understand its behavior. You cannot simply transpose your reflexes acquired in surfing, kitesurfing or windsurfing to the same practice with a foil.
Whatever your background is, your beginnings will be a hassle if you do not integrate some basic notions. Among these notions, there are the axes of stability of your foil. This basic knowledge will also allow you to adapt your foil to your needs as you get better. Let’s see this together!
Finding balance on a foil board is a different story than staying on your feet on a classic board. Because basically, from your takeoff, you are no longer gliding on a hull but flying on an airplane with the deck of your board as the cockpit. The stability of this airplane is governed by the 3 axes of stability: pitch, roll and yaw.
Depending on the foil set-up you are using, you can change the balance. Beginners will want an ultra stable flight and those with more level, a foil as free as possible. Learning which details influence these aspects will help you to better understand and above all to choose the most suitable foil for your needs. All explanations here.
Don’t forget to protect your foil, we have developed a cover that allows you to protect the stabilizer. You don’t risk damaging your foil by storing it in your garage or loading it in the car.
For carbon masts, you can also protect it with our mast covers. This way your foil is fully protected.
Never forget your spare parts
There is nothing more annoying than arriving at the spot, seeing perfect conditions, and then realising that you are missing one or more screws, or that by being in too much of a hurry, you have just screwed up a screw head. Consider that screws are consumables and that they should be changed regularly, and ideally, you should have some in advance.
We also advise you to protect your aluminium foil from galvanic corrosion by using Tikal Tef-Gel. This prevents blisters from forming on the surface of the metal and reliably protects it from corrosion by galvanic currents between different types of metal. You will also avoid jamming your screws, and you will have a much better tightening torque.