{"product_id":"gong-foil-stab-ypra-race-micro-v3-yrm-atmo","title":"GONG | Foil Stab Ypra Race Short Micro V3 Atmo - Pro Team Series","description":"\u003ch4\u003eProgramme\u003c\/h4\u003e\u003cp\u003eThe Micro V3 Atmo race stab designed to maximise VMG, angles, acceleration and average speed over the entire course. This “Short” version maintains the same overall setup length as the V3 Atmo configuration when pairing the Micro V3 Atmo fuselage for the Ypra Race V3 mast.\u003c\/p\u003e\u003ch4\u003eOverview\u003c\/h4\u003e\u003cp\u003eThe Ypra Race Short Micro V3 Atmo Pro Team Series stabiliser uses the same shape as the standard Ypra Race, but is 3 cm shorter to meet one very specific requirement: maintaining the correct overall foil lenght when using the Micro V3 Atmo fuselage designed for the previous-generation Ypra Race V3 mast.\u003c\/p\u003e\u003cp\u003eAs this specific fuselage is 3 cm longer than the standard Micro V3 Atmo fuselage, it naturally increases the overall length of the foil assembly. The Short stabiliser offsets this difference exactly. The result is the same setup length as the standard Ypra Race Micro V3 Atmo configuration, with consistent longitudinal balance, controlled stability and handling that remains true to the original design.\u003c\/p\u003e\u003cp\u003eOverall foil lenght is critical on a race foil. If it is too long, the foil gains stability but loses agility, becomes less responsive when accelerating and requires greater input to adjust its pitch. If it is too short, the foil becomes more playful but also more demanding at high speed. When paired with the fuselage designed for the previous-generation Ypra Race V3 mast, the Ypra Race Short brings the setup back into its ideal operating range.\u003c\/p\u003e\u003cp\u003eIts 9.0 aspect ratio, re-centred surface area and reworked profile significantly widen its operating range. The foil keeps more support in light wind, more glide even when speed drops, and generates less drag when the rider is pushing full speed.\u003c\/p\u003e\u003cp\u003eThe greater chord through the centre brings more presence, better low-end range and improved stability in starts, lulls, speed build-up phases or changes of pace. The finer tips free up Vmax and reduce unwanted reactions at the extremities.\u003c\/p\u003e\u003cp\u003eThe profile generates less downforce than the previous generation. It therefore creates less torque against the front wing, making it possible to use more surface area while reducing the aircraft's overall drag. The foil gains longitudinal balance, stability and efficiency on long reaches.\u003c\/p\u003e\u003cp\u003eThe 60° winglets strongly stabilise the foil in roll and yaw. They keep the aircraft aligned on its trajectory, limit imperceptible side drift under heavy windward heel, and reduce the risk of mast ventilation under extreme loading.\u003c\/p\u003e\u003cp\u003eUpwind, the Ypra Race helps maintain very high angles without needlessly losing speed. On downwind angles, it keeps the aircraft perfectly locked in as speed builds. In gybes and tacks, it lets you enter fast, maintain height and build speed back up without any abrupt stall.\u003c\/p\u003e\u003cp\u003eThe titanium Micro V3 Atmo fuselage further reduces drag and remains compatible with all V3 masts. The stab, however, is exclusively compatible with the Micro V3 Atmo fuselage.\u003c\/p\u003e\u003cp\u003eThe 3K Texalium Purple clear prepreg carbon construction holds its profile and angles under the extreme loads of racing, with direct response and perfectly consistent behaviour.\u003c\/p\u003e\u003cp\u003eThe Ypra Race Micro V3 Atmo Pro Team Series is therefore the race stab built to maximise VMG, hold angles and turn every acceleration into an advantage all the way to the finish line.\u003c\/p\u003e\u003cp\u003eThis stabiliser can also replace the standard Ypra Race stabiliser on a regular Micro V3 Atmo setup. In this configuration, it deliberately shortens the overall foil lenght to create a more compact, playful and responsive foil. The rider gains agility, acceleration and freedom of movement, with a foil assembly that reacts and positions itself more quickly underfoot.\u003c\/p\u003e\u003cp\u003eThe Ypra Race Short is therefore a dual-purpose stabiliser: essential for restoring the reference overall foil lenght when using the fuselage designed for the previous-generation Ypra Race V3 mast, and an exciting option for expert riders looking to shorten their standard Micro V3 Atmo setup for livelier, more playful handling.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GONG","offers":[{"title":"135 cm²","offer_id":57409173291383,"sku":"GON26FOISPPSTAYRA3KP-135S","price":157.5,"currency_code":"EUR","in_stock":true},{"title":"150 cm²","offer_id":57409173324151,"sku":"GON26FOISPPSTAYRA3KP-150S","price":157.5,"currency_code":"EUR","in_stock":true},{"title":"165 cm²","offer_id":57409173356919,"sku":"GON26FOISPPSTAYRA3KP-165S","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/5975\/5071\/files\/00-26-1500-FOIL-STABS-PRO_TEAM_SERIES-V3_ATMO-YPRA_RACE_SHORT-150-GONGFOIL-TB_1f790398-bccb-4389-90e3-980eba1dadad.png?v=1787756643","url":"https:\/\/www.gong-galaxy.com\/en-ch\/products\/gong-foil-stab-ypra-race-micro-v3-yrm-atmo","provider":"GONG Galaxy","version":"1.0","type":"link"}